The E-Gen is a portable power generator that replaces fuel combustion generators
to provide power for trading, leisure or emergency activities. No fuel required,
unbelievably low operating cost.
Due to the weight of this product, please write
to us for shipping cost and your preferred courier of choice (DHL, FedEx, etc.).
Specifications |
|
|
|
| Input Voltage (AC) | 220-250 V |
|
|
| Input Frequency | 50 Hz |
|
|
| Input Line Low Transfer | 120 Vac + 2% |
|
|
| Input Line Low Return | 130 Vac + 2% |
|
|
| Input Line High Transfer | 275 Vac + 2% |
|
|
| Input Line High Return | 260 Vac + 2% |
|
|
| Output Voltage (AC) | 220 Vac (230 V or 240 V re-settable via LCD panel) |
|
|
| Voltage Regulation (Batt. Mode) | < 3% RMS for entire battery voltage range |
|
|
| Output Frequency | 50 Hz + 0.1Hz |
|
|
| Output Waveform | Pure Sine Wave |
|
|
| Output Efficiency | 80% |
|
|
| Output Overload Protection (Line Mode) | Circuit Breaker |
|
|
| Output Overload Protection (Batt. Mode) | 110% ~ 150% for 30 sec., > 150% for 200ms |
|
|
| Battery Quantity (Ah Rating) | 4 units (75Ah or 90Ah) |
|
|
| Battery Voltage | 24Vdc |
|
|
| Battery Mode | Beeping every 4 seconds |
|
|
| Low Battery | Beeping every second |
|
|
| UPS Fault | Beeping continuously |
|
|
| Overload | Beeping twice per second |
|
|
| LCD Display | UPS status, I/P & O/P, Voltage frequency, Load percentage |
|
|
| LED Display | Battery voltage & percentage, Charge current, Temperature, Model |
|
|
| Output Short Protection | Yes |
|
|
| UPS changeover (Typical) | 8ms |
|
|
| Operation Temperature | 0-40°C |
|
|
| Weight (Dependant on batteries used) | 115kg (75Ah) / 135kg (90Ah) |
|
|
| Relative Humidity | 0-95% non-condensing |
|
|
| Noise level | < 55dBA at 1m |
|
|
| Dimensions (mm) | 305W x 835H x 450L |
|
|
